GRABO Pro-Lifter comes as a complete unit, with a pre-installed battery and vacuum seal.
That is not all. There are other accessories in the kit, including a multi-socket charger and a Nylon Handbag.
Details
Gross Weight：3 KG
Battery: 14.8VDC 2600mAh Li-ion
Rated Power: 16W
Charger Input Voltage: 100-240VAC 50/60Hz
Battery Charging Time: ~2hrs
Non-Stop Running Time (Full Charge): 1.5hrs
Running Cycles (On Full Charge): 900 ON-OFF cycles of 10 seconds
Stand-by Mode (Charge Hold): 30 days
Pump Service Life: 100000+ ON-OFF cycles / 800+ hrs continuous
Rated Air Flow: 0.7cfm (20 L/min)
Maximum Vacuum Rate: 11.6Psi (0.8 Bar, 80 kPa)
Maximum Lifting Capacity: 375Lbs (170 kg)
L x W x H 11.77 x 7.22 x 4.76” (300 x 184 x 121 mm)
Working Temperature: 32°F~140°F ( 0°~60 °C )
Applicable Surface Type: Peak/valley heights less than 0.1” (3mm),
arc less than 5°
Additional Features Pump stops automatically at maximum vacuum
rate ( 11.6Psi / 0.8 Bar )
Package Contents:
1 GRABO Pro tool (2024 model with digital display)
1 multi-socket charger
1 seal (preinstalled on the tool)
1 battery (preinstalled on the tool)
Operator’s manual in English
